What causes the DXGI_ERROR_NOT_CURRENTLY_AVAILABLE Error?
DirectX errors are very generic and pop up now and then. The said error message is often due to the following factors — Now there are many solutions that you can try to fix this error and it all depends on the scenario of the error. If it’s caused by one scenario then tweaking or fixing the cause of the error will fix the problem for that scenario so be sure to try all the solutions and see which one matches your scenario.
Solution 1: Update your Graphics Drivers
Many times, when you are graphics drivers are not updated, you are likely to get most of the errors related to DirectX on Windows. So, it’s always a good idea to update your graphics drivers. If you are using Nvidia graphics drivers, head to the Nvidia Graphics Drivers download page and download the latest driver for your GPU. Likewise, if you are using AMD Radeon, go to the AMD Radeon Graphics drivers download page and download the latest driver. After downloading, install the drivers and reboot your computer. If it was a driver issue, hopefully by updating the graphics drivers, your problem would be fixed.
Solution 2: Install latest DirectX
Some users have reported on the Steam forums that downloading the latest DirectX for Windows fixes the problem for them. To download the latest DirectX redistributable for Windows 10, go to the Microsoft Download page for DirectX and download it. Afterward, run the installer to install DirectX or update it on your system. If it was a DirectX issue, then by installing the latest DirectX would fix the problem at your end.
Solution 3: Use HDMI cable to connect to your output Display Device
The next solution you can try if you are using a DVI cable to connect to your output device is to replace it with an HDMI cable instead of your GPU and display device supports it (usually, new display devices and GPUs support it). Since there have been cases of users getting rid of this problem by switching to an HDMI cable. You should try it out and see if it fixes the problem for you.
Solution 4: Change your Display device’s refresh rate:
Another thing you can try is to change the refresh rate of your display device in Windows. Usually, it is recommended to use the 60 Hz refresh rate but if your monitor supports higher refresh rates, then you can try higher ones as well. To change the refresh rate in Windows, do the following: After doing this, run your program again and see it fixes the issue.
Solution 5: Change your Display Resolution
A guy on the EA Forums reported that changing his display resolution fixed the error for him. If you are using modern display devices, then they usually have higher display resolutions supported up to 1080p or 1920×1080. You can try tweaking your display resolution a bit and changing it to a lower value, for example, 1680×1050 and see if it fixes your problem. If your error was caused by an unsupported display resolution by the program or game you want to run then changing it would most probably fix the problem for you.
FIX: Windows Defender Error The service couldn’t be started Error code:…How to Fix PlayStation “An Error Has Occurred” (no error code)?Fix: Error 1310 Error Writing to FileFix: DirectX Setup Error ‘An internal error has occurred’ in Origin
