When the light is stable it means that the connection is established and the internet access is granted. However, when the light is blinking it means the connection isn’t being established properly. Also, keep in mind that the light flashes continuously during a firmware update. In this article, we will provide you viable solutions to fix this issue and also inform you of the reasons due to which this error is triggered.
What Causes the US/DS light to Blink on Xfinity Internet Connection?
After receiving numerous reports from multiple users, we decided to investigate the issue and devised a set of solutions that eradicated the issue for most of our users. Also, we looked into the reasons due to which it is triggered and listed them below: Now that you have a basic idea of the nature of the problem, we will move on towards the solutions. Make sure to implement these in the specific order in which they are presented.
Solution 1: Reinitializing Internet Modem
The most basic troubleshooting step that you can take while trying to fix this problem is to completely reinitialize the device by power cycling it. For that:
Solution 2: Plugging Directly
In some cases, the Splitter used to split the internet cable might be defective and it might be preventing the connection from being established. Therefore, it is recommended to connect the cable directly into the internet modem and check to see if the issue persists. If it goes away, it means that the splitter being used wasn’t working properly.
Solution 3: Contact Customer Support
If the issue still persists after trying the basic troubleshooting methods indicated above, it means that the problem is probably on the ISPs end. Therefore it is recommended to contact your ISP and have them send in a technician to find and rectify the problem.
How to Fix Cursor Blinking in Windows 10?AirPods Blinking Orange? Here’s How to Fix ThemXfinity WiFi Connected but no Internet Access? Try these fixesHow to Fix ‘Error Code XRE-03007’ on Xfinity?
